0022 0023 0024 HPLC vitamin B6 whole blood controls

Vitamin B6 Whole Blood Controls

   
  • Vitamin B6 (PLP, pyridoxal 5’-phosphate)

Order no.: 0022/0023/0024

Product Name Qty
Vitamin B6 Whole Blood Control, Level I
Order no.: 0023
Vitamin B6 Whole Blood Control, Level II
Order no.: 0024
Vitamin B6 Whole Blood Control, Bi-Level (I+II)
Order no.: 0022

Description

Vitamin B6 Whole Blood Controls, lyophilised

0022 Vitamin B6 Whole Blood Control, Bi-Level I + II (lyoph.), 2 x 5 x 2 ml
0023 Vitamin B6 Whole Blood Control, Level I (lyoph.), 5 x 2 ml
0024 Vitamin B6 Whole Blood Control, Level II (lyoph.), 5 x 2 ml

These lyophilised quality controls from Chromsystems are based on human whole blood and should be used according to the instruction manual. They are designed to monitor the accuracy and precision of analytical procedures in clinical diagnostics for the quantitative determination of vitamins B6 (pyridoxal-5´-phosphate) in whole blood. While following the instructions the controls should be handled and measured in the same manner as a patient specimen.

Technical Data

Method of Analysis

HPLC

Parameter

Vitamin B6 (PLP, pyridoxal 5’-phosphate)

Concentrations

Please note: Concentration values shown here are typical. For lot specific concentration values please refer to the product insert supplied with the materials. The product inserts can also be requested from us directly or downloaded from our website after login.

SubstanceUnitValue Level IRange Level IValue Level IIRange Level II
Pyridoxal-5-phosphate mg/l
µmol/l
11.1
44.9
8.9-13.3
35.9-53.9
29.6
119.8
23.7-35.5
95.8-143.7

Reconstitution

Carefully remove the metal seal and rubber stopper from the vials. Add exactly 2.0 ml of distilled water into each vial. Return the stopper and incubate for 10 to 15 minutes at room temperature. Swirl the vials to dissolve the contents until homogeneity.

Storage conditions

Stored below -18 °C and unopened, the lyophilised controls are stable until the expiry date specified on the vial labels. The reconstituted controls can be stored up to 24 hours light protected and tightly capped at +2 to +8 C. If the controls cannot be used within this period, they should be aliquoted and stored frozen below -18 °C (up to 3 months). For more details about storage conditions please check your instruction manual.