0063 HPLC Trileptal Zonisamide Serum Controls Bi-Level

Trileptal, Zonisamide Serum Control, Bi-Level (I+II)

Order no.: 0063
  • 10-OH-carbamazepine
  • Oxcarbamazepine
  • Zonisamide


0063 Trileptal®, Zonisamide Serum Control, Bi-Level I + II (lyoph.)
(Oxcarbazepine [syn. Oxcarbamazepine], 10-Hydoxycarbamazepine, Zonisamide), 2 x 5 x 2 ml

These lyophilised quality controls from Chromsystems are based on human serum and should be used according to the instruction manual. They are designed to monitor the accuracy and precision of analytical procedures in clinical diagnostics for the quantitative determination of trileptal (oxcarbamazepine, 10-hydroxycarbamazepine) and zonisamide in serum/plasma. While following the instructions the controls should be handled and measured in the same manner as a patient specimen.

Technical Data

Method of Analysis



2 x 5 x 2 ml (lyoph.)


10-OH-carbamazepine, Oxcarbamazepine, Zonisamide


Please note: Concentration values shown here are typical. For lot specific concentration values please refer to the product insert supplied with the materials. The product inserts can also be requested from us directly or downloaded from our website after login.

SubstanceValue Level I [mg/l]Range Level I [mg/l]Value Level II [mg/l]Range Level II [mg/l]
Oxcarbamazepine 1.65 1.32-1.98 7.95 6.36-9.54
10-OH-carbamazepine 6.94 5.55-8.33 23.2 18.6-27.9
Zonisamide 11.4 9.12-13.7 37.8 30.2-45.4


Carefully remove the metal seal and rubber stopper from the vials. Add exactly 2.0 ml of distilled water into each vial. Return the stopper and incubate for 10 to 15 minutes at room temperature. Swirl the vials to dissolve the contents until homogeneity.

Storage conditions

Stored at +2 to +8 °C and unopened, the lyophilised controls are stable until the expiry date specified on the vial labels. The reconstituted controls can be stored up to 2 weeks tightly capped at +2 to +8 C. If the controls cannot be used within this period, they should be aliquoted and stored frozen below -18 °C (up to 1 month). For more details about storage conditions please check your instruction manual.