0065 HPLC rufinamide felbamate lacosamide serum controls bi-level

Rufinamide/Felbamate/Lacosamide Serum Control, Bi-Level (I+II)

Order no.: 0065
  • Eslicarbazepine
  • Felbamate
  • Lacosamide
  • N-Desmethylmesuximide
  • Rufinamide


 0065 Rufinamide, Felbamate, Lacosamide Serum Control, Bi-Level I + II (lyoph.)
(Rufinamide, Felbamate, Lacosamide, Eslicarbazepine, N-Desmethylmesuximide), 2 x 5 x 2 ml

These lyophilised quality controls from Chromsystems are based on human serum and should be used according to the instruction manual. They are designed to monitor the accuracy and precision of analytical procedures in clinical diagnostics for the quantitative determination of rufinamide, felbamate, lacosamide in serum/plasma. While following the instructions the controls should be handled and measured in the same manner as a patient specimen.

Technical Data

Method of Analysis



2 x 5 x 2 ml (lyoph.)


Eslicarbazepine, Felbamate, Lacosamide, N-Desmethylmesuximide, Rufinamide


Please note: Concentration values shown here are typical. For lot specific concentration values please refer to the product insert supplied with the materials. The product inserts can also be requested from us directly or downloaded from our website after login.

SubstanceValue Level IRange Level IValue Level IIRange Level II
Lacosamide 7.62 mg/l 6.10-9.14 mg/l 16.9 mg/l 13.5-20.3 mg/l
Felbamate 36.5 mg/l 29.2-43.8 mg/l 87.0 mg/l 69.6-104 mg/l
Rufinamide 16.4 mg/l 13.1-19.7 mg/l 39.3 mg/l 31.4-47.2 mg/l
Eslicarbazepine 7.78 mg/l 6.22-9.34 mg/l 17.4 mg/l 13.9-20.9 mg/l
N-Desmethylmesuximide 18.3 mg/l 14.6-22.0 mg/l 35.7 mg/l 28.6-42.8 mg/l


Carefully remove the metal seal and rubber stopper from the vials. Add exactly 2.0 ml of distilled water into each vial. Return the stopper and incubate for 10 to 15 minutes at room temperature. Swirl the vials to dissolve the contents until homogeneity.

Storage conditions

Stored below -18 °C and unopened, the lyophilised controls are stable until the expiry date specified on the vial labels. The reconstituted controls can be stored up to 3 days tightly capped at +2 to +8 C. If the controls cannot be used within this period, they should be aliquoted and stored frozen below -18 °C (up to 3 months). For more details about storage conditions please check your instruction manual.