0131 0132 0133 HPLC perazine quetiapine citalopram plasma controls

Perazine, Quetiapine, Citalopram Plasma Controls

   
  • Citalopram
  • Perazine
  • Quetiapine

Order no.: 0131/0132/0133

Product Name Qty
Perazine/Quetiapine/Citalopram Plasma Control, Level I
Order no.: 0132
Perazine/Quetiapine/Citalopram Plasma Control, Level II
Order no.: 0133
Perazine/Quetiapine/Citalopram Plasma Control, Bi-Level (I+II)
Order no.: 0131

Description

Perazine, Quetiapine, Citalopram Plasma Controls, lyophilised

0131 Perazine, Quetiapine, Citalopram Plasma Control, Bi-Level I + II (lyoph.), 2 x 5 x 5 ml
0132 Perazine, Quetiapine, Citalopram Plasma Control, Level I (lyoph.), 10 x 5 ml
0133 Perazine, Quetiapine, Citalopram Plasma Control, Level II (lyoph.), 10 x 5 ml

These lyophilised quality controls from Chromsystems are based on human plasma and should be used according to the instruction manual. They are designed to monitor the accuracy and precision of analytical procedures in clinical diagnostics for the quantitative determination of perazine, citalopram and quetiapine in serum/plasma. While following the instructions the controls should be handled and measured in the same manner as a patient specimen.

 

Technical Data

Method of Analysis

HPLC

Parameter

Citalopram, Perazine, Quetiapine

Concentrations

Please note: Concentration values shown here are typical. For lot specific concentration values please refer to the product insert supplied with the materials. The product inserts can also be requested from us directly or downloaded from our website after login.

SubstanceValue Level I
[µg/l]
Range Level I
[µg/l]
Value Level II
[µg/l]
Range Level II
[µg/l]
Perazine 79.2 63.3-95.0 287 230-344
Citalopram 28.3 22.6-33.9 216 172-259
Quetiapine 98.3 78.7-118 403 322-483

Reconstitution

Carefully remove the metal seal and rubber stopper from the vials. Add exactly 5.0 ml of distilled water into each vial. Return the stopper and incubate for 10 to 15 minutes at room temperature. Swirl the vials to dissolve the contents until homogeneity.

Storage conditions

Stored at +2 to +8 °C and unopened, the lyophilised controls are stable until the expiry date specified on the vial labels. The reconstituted controls can be stored up to 1 week tightly capped at +2 to +8 C. If the controls cannot be used within this period, they should be aliquoted and stored frozen below -18 °C (up to 3 months). For more details about storage conditions please check your instruction manual.