MassCheck® Neuroleptics 1/EXTENDED Plasma Controls

MassCheck® Neuroleptics 1/EXTENDED Plasma Controls

   

Order no.: 0210/XT/RUO; 0211/XT/RUO; 0212/XT/RUO

MassTox® Series A

Product Name Qty
MassCheck® Neuroleptics 1/EXTENDED Plasma Control, Level I
Order no.: 0211/XT/RUO
MassCheck® Neuroleptics 1/EXTENDED Plasma Control, Level II
Order no.: 0212/XT/RUO
MassCheck® Neuroleptics 1/EXTENDED Plasma Control, Bi-Level (I+II)
Order no.: 0210/XT/RUO

Description

MassCheck® Neuroleptics 1/EXTENDED Plasma Controls, lyophilised
For MassTox® Series A Parameter Set Neuroleptics 1/EXTENDED in Serum/Plasma.

0210/XT/RUO MassCheck® Neuroleptics 1/EXTENDED Plasma Control, Bi-Level I + II (lyoph.), 2 x 5 x 1 ml
0211/XT/RUO MassCheck® Neuroleptics 1/EXTENDED Plasma Control, Level I (lyoph.), 5 x 1 ml
0212/XT/RUO MassCheck® Neuroleptics 1/EXTENDED Plasma Control, Level II (lyoph.), 5 x 1 ml

 

These lyophilised Chromsystems controls are based on human plasma and should be used according to the instruction manual. They are designed to monitor the accuracy and precision of analytical procedures for the quantitative determination of Neuroleptics 1/Extended. While following the instructions the controls should be handled and measured in the same manner as research samples.

Technical Data

Method of Analysis

LC-MS/MS

Concentrations

Please note: Concentration values shown here are typical. For lot specific concentration values please refer to the product insert supplied with the materials. The product inserts can also be requested from us directly.

SubstanceSuggested value [µg/l]
Level I
Suggested range [µg/l]
Level I
Suggested value [µg/l]
Level II
Suggested range [µg/l]
Level II
Aripiprazole 163 130-195 302 241-362
Dehydroaripiprazole 65.5 52.4-78.6 121 97.1-146
Clozapine 336 269-403 568 455-682
Desmethylclozapine 162 129-194 228 183-274
Haloperidol 4.06 3.25-4.87 18.0 14.4-21.7
Olanzapine 36.5 29.2-43.8 65.9 52.8-79.1
N-Desmethylolanzapine 39.2 31.4-47.0 71.1 56.9-85.3
Quetiapine 63.1 50.4-75.7 260 208-311
Norquetiapine 23.9 19.1-28.6 97.5 78.0-117
Risperidone 8.79 7.03-10.6 13.6 10.9-16.3
9-OH-Risperidone 40.5 32.4-48.6 75.6 60.5-90.7

Reconstitution

Carefully remove the metal seal and rubber stopper from the vials. (Caution when removing the metal seal: risk of injuries due to sharp cutting edges!). Add exactly 1.0 ml of distilled water into each vial. Return the stopper and incubate for 10 to 15 minutes at room temperature. Swirl the vials to dissolve the contents until homogeneity.

Storage conditions

Stored below -18 °C and unopened, the lyophilised controls are stable until the expiry date specified on the vial labels. The reconstituted controls can be stored in glass containers light protected and tightly capped at +2 to +8 C. If the controls cannot be used within this period, they should be aliquoted and stored frozen below -18 °C (up to 3 months). For more details about storage conditions please check your instruction manual.