MassCheck® Mycophenolic Acid/Glucuronide Plasma Controls

MassCheck® Mycophenolic Acid/Glucuronide Plasma Controls

   

Order no.: 0234/RUO; 0235/RUO; 0236/RUO

MassTox® Series A

Product Name Qty
MassCheck® Mycophenolic Acid/Glucuronide Plasma Control, Bi-Level (I+II)
Order no.: 0234/RUO
MassCheck® Mycophenolic Acid/Glucuronide Plasma Control, Level I
Order no.: 0235/RUO
MassCheck® Mycophenolic Acid/Glucuronide Plasma Control, Level II
Order no.: 0236/RUO

Description

MassCheck® Mycophenolic Acid/Glucuronide Plasma Controls, lyophilised
For MassTox® Series A Parameter Set Mycophenolic Acid in Serum/Plasma.

0234/RUO MassCheck® Mycophenolic Acid/Glucuronide Plasma Control, Bi-Level I + II (lyoph.), 2 x 5 x 1 ml
0235/RUO MassCheck® Mycophenolic Acid/Glucuronide Plasma Control, Level I (lyoph.), 5 x 1 ml
0236/RUO MassCheck® Mycophenolic Acid/Glucuronide Plasma Control, Level II (lyoph.), 5 x 1 ml

These lyophilised quality controls from Chromsystems are based on human plasma and should be used according to the instruction manual. They are designed to monitor the accuracy and precision of analytical procedures for the quantitative determination of mycophenolic acid and mycophenolic acid glucuronide in. While following the instructions the controls should be handled and measured in the same manner as research samples.

Technical Data

Method of Analysis

LC-MS/MS

Concentrations

Please note: Concentration values show here are typical. For lot specific concentration values please refer to the product insert supplied with the materials. The product inserts can also be requested from us directly.

SubstanceSuggested Value [mg/l]
Level I
Suggested Range [mg/l]
Level I
Suggested Value [mg/l]
Level II
Suggested Range [mg/l]
Level II
Mycophenolic acid 1.94 1.55-2.33 5.50 4.40-6.60
Mycophenolic acid glucuronide 42.5 34.0-51.0 128 102-154

Reconstitution

Carefully remove the metal seal and rubber stopper from the vials. (Caution when removing the metal seal: risk of injuries due to sharp cutting edges!). Add exactly 1.0 ml of distilled water into each vial. Return the stopper and incubate for 10 to 15 minutes at room temperature. Swirl the vials to dissolve the contents until homogeneity.

Storage conditions

Stored below -18 °C and unopened, the lyophilised controls are stable until the expiry date specified on the vial labels. The reconstituted controls can be stored up to 4 weeks tightly capped at +2 to +8 C. If the controls cannot be used within this period, they should be aliquoted and stored frozen below -18 °C (up to 3 months). For more details about storage conditions please check your instruction manual.

Your Feedback is Appreciated

* Required Fields