0094 0095 0096 HPLC malondialdehyde plasma controls

Malondialdehyde Plasma Controls

   
  • Malondialdehyde

Order no.: 0094/0095/0096

Product Name Qty
Malondialdehyde Plasma Control, Level I
Order no.: 0095
Malondialdehyde Plasma Control, Level II
Order no.: 0096
Malondialdehyde Plasma Control, Bi-Level (I+II)
Order no.: 0094

Description

Malondialdehyde Plasma Controls, lyophilised

0094 Malondialdehyde Plasma Control, Bi-Level I + II (lyoph.), 2 x 5 x 0.5 ml
0095 Malondialdehyde Plasma Control, Level I (lyoph.), 5 x 0.5 ml
0096 Malondialdehyde Plasma Control, Level II (lyoph.), 5 x 0.5 ml

These lyophilised quality controls from Chromsystems are based on human plasma and should be used according to the instruction manual. They are designed to monitor the accuracy and precision of analytical procedures in clinical diagnostics for the quantitative determination of malondialdehyde in serum/plasma. While following the instructions the controls should be handled and measured in the same manner as a patient specimen.

Technical Data

Method of Analysis

HPLC

Parameter

Malondialdehyde

Concentrations

Please note: Concentration values shown here are typical. For lot specific concentration values please refer to the product insert supplied with the materials. The product inserts can also be requested from us directly or downloaded from our website after login.

SubstanceUnitValue
Level I
Range
Level I
Value
Level II
Range
Level II
Malondialdehyde mg/l
µmol/l
15.8
0.22
12.7-19
0.18-0.26
51.1
0.71
40.9-61.3
0.57-0.85

Reconstitution

Carefully remove the metal seal and rubber stopper from the vials. Add exactly 0.5 ml of distilled water into each vial. Return the stopper and incubate for 10 to 15 minutes at room temperature. Swirl the vials to dissolve the contents until homogeneity.

Storage conditions

Stored below -18 °C and unopened, the lyophilised controls are stable until the expiry date specified on the vial labels. The reconstituted controls can be stored up to 4 days light protected and tightly capped at +2 to +8 C. If the controls cannot be used within this period, they should be aliquoted and stored frozen below -18 °C (up to 1 month). For more details about storage conditions please check your instruction manual.