Crosslinks Urine Calibration Standard

Crosslinks Urine Calibration Standard

Order no.: 48003/RUO
  • Deoxypyridinoline (DPD)
  • Pyridinoline (PYD)

Crosslinks in Urine - HPLC

Description

Urine Calibration Standard for Crosslinks in urine, lyophilised

This lyophilised calibrator from Chromsystems is based on human urine and should be used according to the instruction manual. It is designed to calibrate the measurement method for the quantitative determination of crosslinks. While following the instructions the calibrator should be handled and measured in the same manner as research samples.

Technical Data

Method of Analysis

HPLC

Content

5 x 1 ml (lyoph.)

Parameter

Deoxypyridinoline (DPD), Pyridinoline (PYD)

Concentrations

Please note: Concentration values shown here are typical. For lot specific concentration values please refer to the product insert supplied with the materials. The product inserts can also be requested from us directly.

SubstanceUnitValue
Pyridinoline pmol/ml
µg/l
1281
550
Deoxypyridinoline pmol/ml
µg/l
235
97.0
Free pyridinoline pmol/ml
µg/l
383
165
Free deoxypyridinoline pmol/ml
µg/l
68.6
28.4

Manual

 

Reconstitution

Carefully remove the metal seal and rubber stopper from the vials. (Caution when removing the metal seal: risk of injuries due to sharp cutting edges!). Add exactly 1.0 ml of distilled water into each vial. Return the stopper and incubate for 10 to 15 minutes at room temperature. Swirl the vials to dissolve the contents until homogeneity.

Storage conditions

Stored at +2 to +8 °C and unopened, the lyophilised calibrator is stable until the expiry date specified on the vial labels. The reconstituted calibrator can be stored up to 4 weeks tightly capped at +2 to +8 C. If the calibrator cannot be used within this period, it should be aliquoted and stored frozen below -18 °C (up to 6 months). For more details about storage conditions please check your instruction manual.

Your Feedback is Appreciated

* Required Fields