0061 HPLC clobazam norclobazam plasma controls bi-level

Clobazam/Norclobazam Plasma Control, Bi-Level (I+II)

Order no.: 0061
  • Clobazam
  • Norclobazam


Clobazam/Norclobazam Plasma Calibration Standard, lyophilised

These lyophilised quality controls from Chromsystems are based on human plasma and should be used according to the instruction manual. They are designed to monitor the accuracy and precision of analytical procedures in clinical diagnostics for the quantitative determination of clobazam and norclobazam in serum/plasma. While following the instructions the controls should be handled and measured in the same manner as a patient specimen.

Technical Data

Method of Analysis



2 x 5 x 5 ml (lyoph.)


Clobazam, Norclobazam


Please note: Concentration values shown here are typical. For lot specific concentration values please refer to the product insert supplied with the materials. The product inserts can also be requested from us directly or downloaded from our website after login.


SubstanceValue Level I (µg/l)Range Level I (µg/l)Value Level II (µg/l)Range Level II (µg/l)
Clobazam 150 120-180 559 447-671
Norclobazam 991 1193-1189 3881 3105-4657




Carefully remove the metal seal and rubber stopper from the vials. Add exactly 5.0 ml of distilled water into each vial. Return the stopper and incubate for 10 to 15 minutes at room temperature. Swirl the vials to dissolve the contents until homogeneity.



Storage conditions

Stored below -18 °C and unopened, the lyophilised controls are stable until the expiry date specified on the vial labels. The reconstituted controls can be stored up to 1 week tightly capped at +2 to +8 C. If the controls cannot be used within this period, they should be aliquoted and stored frozen below -18 °C (up to 3 months). For more details about storage conditions please check your instruction manual.