Antibiotics Plasma Controls 0182 0183 0184

Antibiotics Plasma Controls

  • Ampicillin
  • Cefepime
  • Ceftazidime
  • Linezolid
  • Meropenem
  • Piperacillin
  • Sulbactam
  • Tazobactam

Order no.: 0183/0184

Product Name Qty
Antibiotics Plasma Control, Level I
Order no.: 0183
Antibiotics Plasma Control, Level II
Order no.: 0184


Antibiotics Plasma Controls, lyophilised.

0183 Antibiotics Plasma Control, Level I (lyoph.), 5 x 1 ml
0184 Antibiotics Plasma Control, Level II (lyoph.), 5 x 1 ml

These lyophilised quality controls from Chromsystems are based on human plasma and should be used according to the instruction manual. They are designed to monitor the accuracy and precision of analytical procedures in clinical diagnostics for the quantitative determination of antibiotics in serum/plasma. While following the instructions the controls should be handled and measured in the same manner as a patient specimen.

Technical Data

Method of Analysis



Ampicillin, Cefepime, Ceftazidime, Linezolid, Meropenem, Piperacillin, Sulbactam, Tazobactam


Please note: All concentrations shown here are exemplatory. They do not reflect real data for the described products. Actual concentrations depend on the production lot of each product and can exclusively be found in the product information leaflet. Please ask for these product information leaflets or download them from the service site of the Chromsystems website.

Substance Unit Target value 
Level I

Level I

Target value
Level II
Level II
Ampicillin mg/l 8.31 6.65-9.97 25.6 20.5-30.7
Cefepime mg/l 17.2 13.8-20.6 84.3 67.4-101
Ceftazidime mg/l 20.0 16.0-24.0 74.0 59.2-88.8
Linezolid mg/l 8.2 6.56-9.84 22.8 18.2-27.4
Meropenem mg/l 15.7 12.6-18.8 50.9 40.7-61.1
Piperacillin mg/l 18.6 14.9-22.3 91.5 73.2-110
Sulbactam mg/l 10.7 8.56-12.8 28.5 22.8-34.2
Tazobactam mg/l 9.9 7.92-11.9 24.7 19.8-29.6


Carefully remove the rubber stopper from the vial. Add exactly 1.0 ml of distilled water into the vial. Replace the stopper and allow to sit for 10 to 15 minutes at room temperature. Swirl the vial to dissolve the contents until homogeneity.

Storage conditions

Storage Temperatures

+2 to +8 °C

< -18 °C

-80 °C


3 Days

1 Week

3 Months

Sulbactam, Tazobactam

1 Week

3 Months

3 Months

Ampicillin, Cefepime, Ceftazidime, Linezolid, Piperacillin

3 Weeks

3 Months

3 Months