1-Hydroxypyrene Urine Controls

1-Hydroxypyrene Urine Controls

  • 1-Hydroxypyrene

Order no.: 0177/0178/0179

Product Name Qty
1-Hydroxypyrene Urine Control, Bi-Level (I + II)
Order no.: 0177
1-Hydroxypyrene Urine Control, Level I
Order no.: 0178
1-Hydroxypyrene Urine Control, Level II
Order no.: 0179


1-Hydroxypyrene Urine Controls, lyophilised

0177 1-Hydroxypyrene Urine Control, Bi-Level (I + II), 2 x 5 x 5 ml
0178 1-Hydroxypyrene Urine Control, Level I, 5 x 5 ml
0179 1-Hydroxypyrene Urine Control, Level II, 5 x 5 ml

These lyophilised quality controls from Chromsystems are based on human urine and should be used according to the instruction manual. They are designed to monitor the accuracy and precision of analytical procedures in clinical diagnostics for the quantitative determination of 1-hydroxypyrene in urine. While following the instructions the controls should be handled and measured in the same manner as a patient specimen.

Technical Data

Method of Analysis





Please note: Concentration values shown here are typical. For lot specific concentration values please refer to the product insert supplied with the materials. The product inserts can also be requested from us directly or downloaded from our website after login.

SubstanceUnitValue Level IRange Level IValue Level IIUncertainty
1-Hydroxypyrene µg/l 
± 2.7 %


Carefully remove the metal seal and rubber stopper from the vials. Add exactly 5.0 ml of distilled water into each vial. Return the stopper and incubate for 10 to 15 minutes at room temperature. Swirl the vials to dissolve the contents until homogeneity.

Storage conditions

Stored at +2 to +8 °C and unopened, the lyophilised controls are stable until the expiry date specified on the vial labels. The reconstituted controls can be stored up to 4 weeks tightly capped at +2 to +8 C. If the controls cannot be used within this period, they should be aliquoted and stored frozen below -18 °C (up to 3 months). For more details about storage conditions please check your instruction manual.