92026XT LCMS TDM Series A 3PLUS1 calibrator neuroleptics2_XT

3PLUS1® Multilevel Plasma Calibrator Set Neuroleptics 2/ EXTENDED

Order no.: 92026/XT
  • Amisulpride
  • Chlorprothixene
  • Levomepromazine
  • Melperone
  • Perazine
  • Pipamperone
  • Promethazine
  • Sertindole
  • Sulpiride
  • Thioridazine
  • Ziprasidone
  • Zotepine
  • Zuclopenthixol

Component of the Parameter Set Neuroleptics 2/EXTENDED, available separately

Description

3PLUS1® Multilevel Plasma Calibrator Set fot the Parameter Set Neuroleptics 2/EXTENDED,lyophilised

These lyophilised calibrators from Chromsystems are based on human plasma and should be used according to the instruction manual. They are designed to calibrate the measurement method in clinical diagnostics for the quantitative determination of neuroleptics 2/Extended in serum/plasma. While following the instructions the calibrators should be handled and measured in the same manner as a patient specimen.
These calibrators are only available as multilevel calibrator set with 3 different concentration levels plus 1 blank value.

Technical Data

Method of Analysis

LC-MS/MS

Content

4 x 1 ml (lyoph.)

Parameter

Amisulpride, Chlorprothixene, Levomepromazine, Melperone, Perazine, Pipamperone, Promethazine, Sertindole, Sulpiride, Thioridazine, Ziprasidone, Zotepine, Zuclopenthixol

Concentrations

Please note: Concentration values shown here are typical. For lot specific concentration values please refer to the product insert supplied with the materials. The product inserts can also be requested from us directly or downloaded from our website after login.

Substance Calibrator 1
(µg/l)
Calibrator 2
(µg/l)
Calibrator 3
(µg/l)
Blank Calibrator
(µg/l)
Amisulpride 39.1 330 625 n.d.
Chlorprothixene 14.4 194 369 n.d.
Levomepromazine 3.42 99.9 193 n.d.
Melperone 22.0 633 1157 n.d.
Perazine 15.0 268 485 n.d.
Pipamperone 13.7 257 494 n.d.
Promethazine 35.5 261 482 n.d.
Sertindole 10.9 66.4 121 n.d.
Sulpiride 30.4 637 1244 n.d.
Thioridazine 61.2 1218 2333 n.d.
Ziprasidone 14.3 128 238 n.d.
Zotepine 7.81 98.1 183 n.d.
Zuclopenthixol 2.62 64.5 120 n.d.

n.d. = not detected (< LOQ)

The blank level is manufactured using the same matrix pool as used for the calibrator levels 1, 2 and 3. It was not fortified with any neuroleptics.

Reconstitution

Carefully remove the metal seal and rubber stopper from the vials. Add exactly 1.0 ml of distilled water into each vial. Return the stopper and incubate for 10 to 15 minutes at room temperature. Swirl the vials to dissolve the contents until homogeneity.

Storage conditions

Stored below -18 °C and unopened, the lyophilised calibrators are stable until the expiry date specified on the vial labels. The reconstituted calibrators can be stored in glass containers up to 1 week light protected and tightly capped at +2 to +8 C. If the calibrators cannot be used within this period, they should be aliquoted and stored frozen below -18 °C (up to 3 months). For more details about storage conditions please check your instruction manual.