3PLUS1® Multilevel Plasma Calibrator Set Antibiotics

3PLUS1® Multilevel Plasma Calibrator Set Antibiotics

Order no.: 61028
  • Ampicillin
  • Cefepime
  • Ceftazidime
  • Linezolid
  • Meropenem
  • Piperacillin
  • Sulbactam
  • Tazobactam


3PLUS1® Multilevel Plasma Calibrator Set Antibiotics, lyophilised

For Antibiotics in Serum/Plasma (61000).

These lyophilised calibrators from Chromsystems are based on human plasma and should be used according to the instruction manual. They are designed to calibrate the measurement method in clinical diagnostics for the quantitative determination of antibiotics in serum/plasma. While following the instructions the calibrators should be handled and measured in the same manner as a patient specimen.

These calibrators are only available as multilevel calibrator set with 3 different concentration levels plus 1 blank value.

Technical Data

Method of Analysis



4 x 1 ml (lyoph.)


Ampicillin, Cefepime, Ceftazidime, Linezolid, Meropenem, Piperacillin, Sulbactam, Tazobactam


Please note: All concentrations shown here are exemplatory. They do not reflect real data for the described products. Actual concentrations depend on the production lot of each product and can exclusively be found in the product information leaflet. Please ask for these product information leaflets or download them from the service site of the Chromsystems website.

Substance UnitCalibrator 1Calibrator 2Calibrator 3Blank Calibrator
Ampicillin mg/l 3.09 17.0 48.5 n.d. (< 1.0 mg/l)
Cefepime mg/l 3.26 43.0 169 n.d. (< 2.2 mg/l)
Ceftazidime mg/l 8.06 40.2 147 n.d. (< 1.8 mg/l)
Linezolid mg/l 4.05 15.4 30.2 n.d. (<  0.5 mg/l)
Meropenem mg/l 4.21 31.6 99.7 n.d. (< 1.1 mg/l)
Piperacillin mg/l 7.36 46.4 181 n.d. (< 1.0 mg/l)
Sulbactam mg/l 4.4 19.8 46.5 n.d. (< 2.2 mg/l)
Tazobactam mg/l 4.68 18.6 30.2 n.d. (< 4.0 mg/l)

n.d. = not determined, analytes under LOQ


Carefully remove the rubber stopper from the vial. Add exactly 1.0 ml of distilled water into the vial. Replace the stopper and allow to sit for 10 to 15 minutes at room temperature. Swirl the vial to dissolve the contents until homogeneity.

Storage conditions

Storage Temperatures

+2 to +8 °C

< -18 °C

-80 °C


3 Days

1 Week

3 Months

Sulbactam, Tazobactam

1 Week

3 Months

3 Months

Ampicillin, Cefepime, Ceftazidime, Linezolid, Piperacillin

3 Weeks

3 Months

3 Months